MINIMAL windows and doors system, with the possibility of INTERNAL SIDE WALL FLUSH and ALL EXTERNAL SIDE GLASS. Triple sealing gasket; in 3 layers laminated wood in a choice of: pine, fir, oak, okoumè, larch or others on request, external aluminium cladding on the sashl, frame profile completely in aluminium with thermal break.
Wood Surface treatment based on acrylic resins in aqueous emulsion; the applied cycle varies from three to six coats depending on the finish and the required durability.
Fixed aluminium window frame with thermal break nominal section 70 x 56 mm.
Wood laminated turn sash nominal section 68 x 67 mm.
Standard Maico Multi-Matic Power retractable hardware with tilt and turn and lever rod. Complete with anti-burglary striker plates and pawls along the entire perimeter.
Triple abutment sealing profile with triple gasket. Square shaped integral glazing bead.
Use of single-chamber double glazing or low-emission double-chamber triple glazing with standard Argon gas and Warm edge, in accordance with the current regulations. Of variable thicknesses and types (solar control, safety, acoustic, satin…) according to requirements.
Thermal insulation reachable up to UW value of 0.80 W/m2K.
*calculated thermal values (according to the standard UNI EN ISO 10077-1 and 2) with fir wood thermal transmittance on 1 sash dimensions 1230 x 1480mm (according to the standard UNI EN 14351-1), low-emission double glazing with value Ug = 0.5 (W/m²K)
Starting from 31 dB for windows based on glass noise reduction values up to 43 dB.
**possibility of inserting other glass in order to improved noise reduction
MINIMAL CENTRAL NODE.
Only 10 cm. Compared to standard knots that can also reach 16cm. Aluminium casing for external profile (standard).
INSTALLATION OF THE FRAME FLUSH WITH THE WALL.
Only 6.7 cm sash profile will remain visible. This solution will give more space in the room with clean lines and an incredible elegance, maintaining all the excellent functionality and performance typical of Giemme windows.
LAYING AND DRAINAGE WORK.
Detail of installation of Secret window frame system, with lower crossbar resting on the threshold (in light).
Drainage of water through special outflows.
LAYING AND DRAINAGE WORK.
Detail of Secret window frame system, with a retractable bottom sideways.
Drainage of water through special outflow in the counter frame.
To enhance your knowledge about our range, Giemme provides product technical drawings, a tool to increase the opportunity for users and professionals to immediately check sizes and solutions adopted.
Have you not found the answers to your questions?
Our team is available to hear and answer your questions during the following hours:
Mon – Fri 8.30-12.30 / 15-19
Saturday 8.30-12.30 (Except Summer season)