fbpx

logo

Giemme manufacture and commercialize windows, doors and sliding doors in wood, wood aluminum, wood bronze, aluminum, and PVC for the residential and commercial construction, shutters, security systems, amour plated doors, entry doors and exterior structures

Giemme also manufacture wood interior doors, satin glass interior doors, Wood and metal interior doors, lacquer doors, laminated interior doors.


LIFT AND SLIDE – Alzante Over 68

DESCRIPTION
Lift-slide engineered profile consists of 3 or more solid or finger-jointed layers, both for frame and sash, glued with class D4 glue according to standard regulation EN204. The boards forming the laminated profile can be solid or jointed through finger-joint system depending on its application or technical specifications.
The Over 68 system allows the construction of operable lift & slide door on one or two parallel tracks of 1, 2, or more door spaced from each other about 28 mm or 1 ¼ Inch, center section provided with special moulded profiles with brush and gasket. The internal glass stop is available in four shapes: rounded, blunted, squared, baroque.

DIMENSIONS
Fixed frame mm 164 x 56 or 6” 29/64 x 2” 13/64.
Fixed and operable door mm 100 x 68 or 3” 15/16 x 2” 43/64, double plinth mm 179 x 68 or 7” 3/64 x 2” 43/64.

THRESHOLD DRAIN GASKET
Set of gaskets in EPDM and PVC.
threshold to be chosen from basic track binary type (h=19mm)
and high thermal insulation fiberglass Climatech (h=25mm).

OPERATING DEVICES
The hardware consists of top and bottom rails in which run wheeled trolleys fitted on ball bearings with a standard load capacity of 300 kg, or strengthened with load capacity up to 400 kg.
The movement of the doors is operated through a leverage system which allow through the rotation of the handle such as to enable the leaf lifting and sliding.
The closure is ensured by locking devices located in vertical and horizontal side matching the mobile leaf.

INSULATED GLASS
Dual pane, single chamber, low-e glass with Argon and aluminum spacer or on request “warm edge”; interior and/or exterior glass sheets, tempered or laminated as per standards UNI 7697:2015; it is possible to insert triple pane with double chamber with a thickness that does not exceed 34mm.

WOOD PROTECTION
Surface treatment of the wood with acrylic based resins in water emulsion; the application cycle varies from three to six layers depending on the finish and the duration requested.

pictures